How to do fine water mist nozzle blocked?

Water mist nozzle blocking solution
 
How to do the water mist nozzle blocked, this problem is believed to trouble many people, when we use the water mist nozzle, we should do a good job of maintenance, to avoid the water mist nozzle blocked, if the water mist nozzle blocked, we can solve the problem through the following methods:
 
 
How to solve the problem of water mist nozzle blockage
1. The installation problem leads to the blockage of the water mist nozzle
Incorrect installation of water spray nozzle will bury hidden trouble for water spray nozzle, for example, the washer deviates from the axis when the water spray nozzle is installed, or the spray effect of water spray nozzle cannot reach the expected goal when the water spray nozzle is installed too tightly. How to do fine water mist nozzle blocked? The installation problem of the water mist nozzle can be solved by secondary installation after disassembly. If the installation has caused damage to the water mist nozzle, the water mist nozzle should be replaced.


If the water mist nozzle is blocked due to installation problems, replace the nozzle immediately
2, corrosion and wear lead to fine water mist nozzle blocked
 
With the delay of working time, the water mist nozzle will gradually be corroded by the tank liquid, or be worn. After the water spray nozzle is corroded or worn, the surface of the nozzle and internal flow channel will gradually deform or increase, which will affect the flow rate, spray pressure and spray shape of the water spray nozzle. It is difficult to repair the water mist nozzle after corrosion and wear injury, so how to do the water mist nozzle blocked? There is only one answer, and that is to change the fine spray nozzle.
 

Corrosion and wear cause the water mist nozzle to be blocked and a new nozzle needs to be replaced
3, bonding leads to the blocking of water mist nozzle
Water mist nozzle after working for a long time, or processing by the slot liquid because of various reasons to accelerate evaporation, the edge of the water mist nozzle mouth inside and outside is likely to be because splash, atomization and chemical accumulation effect, left behind a dry solidification layer, as a result, lead to water mist sprinkler or within the port congestion, water mist nozzle jam? We can ask the maintenance personnel to clear it.
 

If the water mist nozzle is blocked due to bonding, please ask the maintenance personnel to dredge it
4. Temperature damage leads to blockage of water mist nozzle
Water mist nozzles working in an environment where the temperature is higher than the rated temperature for a long time will cause damage due to high temperature, such as deformation of water mist nozzles or deformation of spray shape. If the water mist nozzle is damaged by high temperature, it proves that the material of the water mist nozzle is not suitable for the working environment at that time, how to do when the water mist nozzle is blocked? We should have a plan to replace the water mist nozzle to avoid unnecessary economic losses.


The temperature damage causes the water mist nozzle to be blocked. Replace the nozzle as planned
5, the blockage of the nozzle leads to the blockage of the water mist nozzle
In the long spraying process of water spray nozzle, the dirt and impurities in the tank liquid will gradually accumulate at the mouth of water spray nozzle or in the internal flow pipe. After the water mist nozzle is blocked, the flow rate of the water mist nozzle will gradually decrease, affecting the working pressure, spray shape and uniformity of liquid particles of the water mist nozzle. How to do fine water mist nozzle blocked? After the water mist nozzle is blocked, it can be repaired and dredged. If the blockage is serious, a new water mist nozzle should be replaced.
 
 
The water mist nozzle is blocked and needs to be replaced
 
How to do fine water mist nozzle blocked? In the case that we have encountered a fine water mist nozzle blocked, we need to quickly find the corresponding solution, dredging or replacement, so as not to delay our use and cause greater damage.