The characteristics of the fan nozzle

The flat fan nozzle is a nozzle with adjustable spray angle and a flat fan spray range, which is suitable for spraying and cooling over a large area. The characteristics of the fan nozzle are as follows:
1. Wide spraying range: the fan nozzle can spray a large area, can meet the needs of large areas of water, such as irrigation farmland, spray cooling and so on.
2. Adjustable spray Angle: The Angle of the fan nozzle can be adjusted according to needs, and the spray Angle is usually between 30° and 300°, which can flexibly respond to different spray ranges.
3. Stable flow rate: The jet flow of the fan nozzle is relatively stable, which can ensure the uniformity of water distribution, and the water yield of each nozzle is small.

The characteristics of full cone nozzle

Full cone nozzle is a nozzle with a full cone spray range, which is suitable for spraying local areas, such as flower beds, small lawns, etc. The characteristics of the full cone nozzle are as follows:
1. Small spraying range: the full cone nozzle can spray a small area, suitable for spraying local areas, such as flower beds, small lawns and so on.
2. Fixed spray Angle: The spray Angle of the full cone nozzle is usually fixed and cannot be adjusted. However, different nozzles can be selected according to needs, and the spray Angle can be between 40°-360°.
3. Large flow rate: compared with flat fan nozzle, the flow rate of full cone nozzle is larger, and the water output of each nozzle is different, so a reasonable scheme design is needed.

The choice of fan nozzle and full cone nozzle

In practical applications, it is necessary to choose the appropriate nozzle type according to the needs. If it is necessary to spray irrigation or spray cooling operation in a large area, the fan nozzle should be selected; If you need to spray a small area, you should choose a full cone nozzle.
In addition, the appropriate spray Angle and flow rate should be selected according to the needs to achieve the best spray irrigation effect. At the same time, pay attention to the Angle and spacing of the nozzle installation, avoid spray dead corners and repeated spray areas, in order to make full use of water resources and improve efficiency.