First, furniture paint color need to pay attention

1, in the deployment of multi-color paint, to choose the same performance of the paint to match.
2, when matching colors, first select the main color, and estimate the proportion of various colors, and then from shallow to deep deployment, country and country mixing.
3. Pay attention to what auxiliary materials, accelerants and diluents should be added in the deployment process. Curing agent and so on.
4, in the deployment of gray, green paint is matched with medium color, may occur (floating color) phenomenon. At this time you can add a small amount of silicone oil to prevent
5. To adjust the color in the sunshine, the color of the deployment should generally be slightly lighter than the color of the original sample.
 

Second, furniture paint atomizing color skills

 
1, the color needs to be careful and careful, generally try the sample first, initially obtain the number of paint that should match the color, and then prepare the large sample based on the sample results. The secondary color and the secondary color are adjusted separately in the small container.
2. First add the main color (the color with large amount and small coloring force in the color matching), and then add the dark color (or color matching) with large dyeing force slowly and intermittently, and constantly stir, and observe the change of color at any time.
3, "from shallow to deep", especially when adding pigments with strong coloring power, avoid excessive.
 

 
4, in the color matching, there will be slight differences in the color of the coating and the dry film. The color of various coatings is generally lighter when the film is wet, and when the coating dries, the color is deepened. Therefore, if the sample is a dry sample, the color matching paint needs to be dried before color measurement and comparison; If the sample is wet, you can put a drop of the sample in the color matching paint to see if the two colors are the same.
 
5, we should understand in advance the floating degree of the primary color in the multi-color paint and the change of the paint, especially amino paint and pervinyl chloride paint, need to pay more attention.
 
 
6, when deploying multi-color coatings, to choose the same nature of the coating to deploy each other, the solvent system should also be miscible, otherwise due to the miscibility of the coating is not good, will affect the quality, and even stratification, precipitation or gelation phenomenon, can not be used.
 
7, because the color is often with a variety of different color heads, if with positive green, generally used with green head of yellow and yellow head of blue; When matching purple, blue with red head and red with blue head should be used; When matching orange, red with yellow head and yellow with red head should be used.
 
8, should pay attention to the deployment of color in the process, but also to add what auxiliary materials, such as drier, curing agent, diluent, etc., color, so as not to affect the color.
 
9, in the deployment of gray, green and other multi-color paint, due to the preparation of a variety of pigments, the density of the pigment, the amount of oil absorption is different, it is likely to occur "floating color", "flower" and other phenomena, then you can add a trace of surfactants or leveling agents, anti-floating color agents to solve. As usual, 0.1% silicone oil is added to prevent and control, and various surface active agents produced by foreign companies need to distinguish which solvent system to use, and the amount of addition is generally 0.1% ~ 1%.
 
10, the use of color paint film slightly transparent characteristics, the selection of appropriate base color can make the color of the top paint more vivid than the color of the original paint, which is based on the principle of natural light reflection and absorption, the base color and the primary color superimposed after a kind of color, paint engineering called "color through". For example, the yellow primer can make the red more vivid, the gray primer makes the red more red, the positive blue primer can make the black more black and bright, and the water blue primer makes the white more clean and clean.