First, physical cleaning atomizing nozzle

Physical cleaning is a common cleaning method, which can be cleaned by brushes, cotton swabs, fine needles and other instruments. The specific steps are as follows:

 
1. Take off the atomizing nozzle and soak it with detergent for 3 to 5 minutes.
2. Use brushes, cotton swabs and other tools to clean the inside of the atomizing nozzle.
3. Clean the nozzle hole with a fine needle, taking care not to break the needle in the nozzle hole.
4. Wash with water until clean.
5. Put the atomizing nozzle in a ventilated place to dry naturally, do not wipe with things.

Second, chemical cleaning atomizing nozzle

Chemical cleaning is suitable for more stubborn dirt and deposits and can be cleaned with cleaning agents. The specific steps are as follows:
 
1. Remove atomizing nozzle and place in cleaning agent.
2. Spray the cleaning agent with a cotton swab or watering can to allow the cleaning agent to fully enter the nozzle.
3. Soak for 5~10 minutes and take out the atomizing nozzle.
4. Clean the atomizing nozzle with water until it is clean.
5. Put the atomizing nozzle in a ventilated place to dry naturally.


 

Third, ultrasonic cleaning atomizing nozzle

Ultrasonic cleaning is a high-tech cleaning method that can completely remove dirt and sediment inside the nozzle. The specific steps are as follows:
 
1. Put the nozzle into the ultrasonic cleaning machine.
2. Add the cleaning solution and follow the instructions.
3. Turn on the ultrasonic cleaning machine and clean the atomizing nozzle for about 30 minutes.
4. Take out the atomizing nozzle and clean it with water.
5. Put the atomizing nozzle in a ventilated place to dry naturally.
 
Summary: The above three cleaning methods can effectively clean the atomizing nozzle, and the cleaning effect is also different. When cleaning the atomizing nozzle, it is best to understand the structure of the nozzle and clean according to its structure. At the same time, be sure to close the atomizer before cleaning to avoid accidents.