The spray type covered by full cone nozzle is round, square or oval, and the area is completely filled with spray droplets. This spray type is usually formed using an internal blade. The blades allow controlled turbulence of the liquid in front of the nozzle. full cone cover can also be obtained by using the collection tube arrangement of atomizing or micro-atomizing nozzles. full cone nozzle is mainly used in cleaning and rinsing, spray coating, spray cooling, defoaming, chemical spraying, ash pressure dust removal field.
 
The spray type covered by full cone nozzle is round, square or oval, and the area is completely filled with spray droplets. This spray type is usually formed using an internal blade. The blades allow controlled turbulence of the liquid in front of the nozzle. full cone cover can also be obtained by using the collection tube arrangement of atomizing or micro-atomizing nozzles. full cone nozzle is mainly used in cleaning and rinsing, spray coating, spray cooling, defoaming, chemical spraying, ash pressure dust removal field.
 
 

The main product categories are as follows:

 
 

full cone combination wide Angle TGW series

 This is a kind of full cone nozzle can produce large Angle spray shape, spray Angle between 102 degrees to 120 degrees, spray shape is full round or square, working pressure 0.4-6mpa, flow 0.83-14.3L/Min. Unit combination assembly mode, easy installation and disassembly, can be matched with filter. Standard inch thread connection, can be customized for other connections.

 

full cone combination standard Angle TG series

 This is a small spray Angle of full cone nozzle, can produce the Angle of 45-67 degrees of spray, spray shape is round and square, the working pressure is 0.4-10mpa, flow 0.16-13.0L/Min. Unit combination assembly mode, easy installation and disassembly, can be matched with filter. Standard inch thread connection, can be customized for other connections
 

full cone combination square TGSQ series

Can produce 60-75 degree spray full cone spray, spray shape is round and square, working pressure is 0.4-10mpa, flow rate is 0.4-23L/Min. Unit combination assembly mode, easy installation and disassembly, can be matched with filter. Standard inch thread connection, can be customized for other connections
 

full cone square wide Angle series

The nozzle has a cross blade inside, the nozzle is a cross groove. The spray shape is square, the spray coverage is large, the spray Angle is 93-110 degrees, the spray droplets are small and uniform, the nozzle is especially suitable for overlapping spray range of work
 
  

full cone square standard Angle series

The nozzle has a cross blade inside, the nozzle is a cross groove. The spray shape is square, the spray Angle is 47-102 degrees, the spray droplets are small and uniform, the nozzle is especially suitable for overlapping spray range of work
 
  

full cone porous FF series

Porous structure, no internal blade design, reduce the possibility of blockage, the shape of the spray is dense large flow full cone, spray distance is far, spray range is large, suitable for the need for a long working distance
 

full cone Angle GA series

And the general full cone nozzle has the same spray characteristics, spray shape is full cone, spray Angle has two kinds of standard Angle and wide Angle, the nozzle is suitable for side hole spray pipe.
 
  

full cone wall mounting GD series

And the general full cone nozzle has the same spray characteristics, spray shape is full cone, nozzle head has external thread, specifications and nozzle inlet thread is the same, suitable for installation on the container and pipe wall.
 
  
 
full cone screw SPJT-A series
 
Standard design of spiral nozzles, widely used. There are a variety of Angle and flow parameters to choose from, and can provide special needs service nozzle design, internal non-clogging structure design, can be used in dust control, desulfurization and denitration, various synthetic tower applications.
 
  
 
full cone spiral SPJT-S series
 
The standard design of the spiral nozzle differs from the A series in that the spray shape has A wider range of Angle choices.
 
  
 
full cone anti-plug SMP series
 
Integral design, internal double blade forming through the diameter, with the nozzle overall casting molding, the nozzle allows through the particle diameter than the ordinary full cone spray three times, to avoid nozzle clogging problem under bad working conditions.
 
 
 
full cone large flow RRF series
 
The spray shape is full cone, and the spray Angle is 50° ~ 95°. The spray particles are large, and the full cone spray can be formed at ultra-low pressure (0.7mpa). With large circulation channel and outlet, to ensure no blocking work
 
  
 
full cone high flow HHF series
 
The full cone nozzle has a unique blade design inside to ensure a uniform atomization effect even under a large flow rate.
 
  
 
full cone narrow Angle GH30 series
 
The nozzle spray Angle is 30 degrees full cone, spray particles small and uniform, spray range impact force is very strong, suitable for cleaning and other work occasions
 
  
 
full cone narrow Angle GH15 series
 
The nozzle spray Angle is 15 degrees full cone, spray particles small and uniform, spray range of strong impact force, suitable for cleaning and other work occasions
 
  
 

full cone wide Angle HW/GW series

 
The blade structure inside the nozzle enables it to produce uniform and dense spray droplets, and the spray Angle selection is large
 
  
 

full cone universal H/G series

The blade structure inside the nozzle enables it to produce uniform and dense spray droplets, spray Angle and universal full cone