The cooling effect of spray humidification and cooling makes the working environment more comfortable

 
Spray cooling of the cooling effect to make the environment more comfortable, now the factory is mostly choi steel structure, due to the summer the sun radiation, in equipment operation of the plant to generate heat, make indoor environment temperature of 40 ℃ above, bring discomfort to the staff, cause dizziness, heat stroke, etc., lead to the production efficiency and production quality, too, fell, Improving such working environment is an issue that cannot be ignored.
 
Now, spray cooling system can be effective and economic cooling way, cooling equipment manufacturers use atomizing nozzle misting cooling, easy to make the temperature of iron factory will come down. Spray cooling system is a new type of energy-saving cooling equipment, taking water as raw material, the use of high pressure plunger pump pressurized water to more than 7 million mpa, through the spray nozzle liquid misting cooling, cooling terminals will spray particles size 3-10 PM by special misting nozzle, quickly spread through the air, the diffusion process by continual evaporation and absorb a large amount of thermal energy, The ambient temperature drops from 3 ° C to 8 ° C instantly, bringing you a comfortable working environment.
 
It is understood that after the whole equipment of spray cooling system is started, it only needs 6W electric energy to atomize 1 litre of water, and the energy consumption is very low. In terms of cost performance and cooling effect, especially in industrial plants, the atomized cooling system has considerable advantages. misting cooling system is fully automatic control, equipped with timing control in the electrical control, through the host panel to set the spray time interval arbitrarily; It can also transmit the host computer controller through the sensing signal, and control the constant pressure system by the frequency converter. It can timely control multiple operating environments according to the changes of internal temperature and humidity in the environment, without manual duty, and fully realize automatic control.
 
The misting cooling system is easy to install, and the pipes are made of high-pressure copper pipe or nylon pipe. The pipes only need to be arranged in the working environment. The water required is clean tap water, non-toxic and harmless, no impact on the environment. misting cooling system is energy-saving and convenient cooling equipment.
 
Spray cooling cooling work spray speed, long range, wide coverage, can achieve precision spray; When spraying water and removing dust from the yard easily caused by dust, the fog particles emitted from the atomizing nozzle are small and form a wet mist when they contact with the floating dust, which can quickly suppress the dust settling. Supporting power flexible, but also supporting diesel generator set power supply, both available three-phase 380V power supply, but also supporting diesel generator set power supply installed on transport vehicles, can be fixed on the platform of concrete buildings, automatic heating function in winter can spray, 359 degrees of rotation spray, PLC centralized control system can remote spray.
 

The effect of spray humidification and cooling is not only humidifying the ambient air

 
Spray humidification consists of a dry mist humidifier, a control component, an installation component, an air or water pipe, a humidity detection device, and a water quality filter device. The purpose of spray humidification is to artificially create fog through the spray humidification system. The particle size of this water mist is very small, and it can float in the air. This tiny micro mist floating in the air for a long time achieves the effect of humidifying the surrounding air, and does not wet the materials and walls.
 
Spray humidification not only plays a role in humidifying the ambient air, but also plays a certain cooling effect and anti-static effect (when the humidity is high, the generation of static electricity is reduced) dust removal and dust suppression.
 
Spray water into a fine mist into the humidifying environment by physical means. There are mechanical centrifugal humidification, water spray humidification, high pressure spray humidification, ultrasonic humidification and so on. Evaporative humidification heats water to produce steam, which is sprayed into the humidification environment. Humidity The amount of moisture in the air in a unit of humidity. There are many charged particles floating in the air, which we call "air ions". It has the difference between positive and negative charge, and the air ions with negative charge are called "negative ions". Relative humidity is usually used to indicate the level of humidity in %RH units.
 
It reflects the ability of air to approach saturation. The higher the humidity, the closer the air is to saturation. On the contrary, the drier the air is, the smaller the humidity is, the drier the air is. The principle of ultrasonic misting uses the characteristics of ultrasonic transducer to transform electric energy into mechanical energy. Under the action of 1.7 million times/second high frequency shock, the water mist into ultrafine particles to form water.

Characteristics of spray humidification system:

1. Fine fog: the high-pressure nozzle can produce 5 billion fog droplets per second, the diameter of fog droplets is only 0.5~15μm, good humidification and cooling effect.
2. Energy saving: atomizing 1 kg of water only consumes 6W power.
3. Reliable: The main machine of high pressure spray cooling and humidification system adopts imported industrial high pressure pump, which can operate continuously for 24 hours. Nozzles and water mist dispensers have no power fragile parts, which will not be damaged in high dust environment.
4. Safe and automatic pressure relief: when the sprayer stops working, the body automatically releases the pressure of the high-pressure nozzle to prevent dripping from the nozzle.
5. Automatic water shortage and power failure system: prevent pump idling phenomenon due to no water, improve pump life.
6. Hygiene: the water of the high-pressure micromist system is sealed and non-recycled, which will not cause the reproduction of bacteria.
7. Humidification capacity: large humidification capacity and nozzle can be freely combined. The humidification capacity ranges from 5kg/h to 900kg/h.
8. Humidification efficiency is more than 95%.
 
The above is the related knowledge point of spray humidification, I hope the above content can help you.