1. Pressure
Under normal circumstances, the higher the pressure, the better the spray effect. If we use the flat fan nozzle when the spray effect is not good, we may wish to increase the pressure. However, it should be noted that the pressure should not be excessive, otherwise it will cause damage to the flat fan nozzle itself.
2. Spray Angle
Many times the spray effect of the flat fan nozzle is not ideal, in fact, it is not caused by other reasons, but because of the Angle of the flat fan nozzle spray. At this time, we need to adjust the position of the flat fan nozzle or adjust its pressure to get the ideal spray Angle.
3. Flow rate
The flow rate of the flat fan nozzle itself also affects the flat fan effect, and when we choose the flat fan nozzle, we need to choose the corresponding model according to our own needs. However, the flat fan nozzle in use for a long time, there will be wear and other conditions, this time the flow will change, the spray effect is not good, we need to replace the flat fan nozzle.
4. Temperature influence
The temperature is too high or too low, will have a certain impact on the spray effect of the flat fan nozzle. If the temperature is too low in winter, if the liquid temperature of the spray is too low, it is easy to make the nozzle freeze and other conditions, and the spray effect is of course not ideal.
5. Coverage
Sometimes the flat fan nozzle is installed too low, its coverage will become small, and its spray effect will become unsatisfactory. At this time, we only need to adjust the installation height of the flat fan nozzle.