The planning characteristics of the vortex nozzle: the selection of silicon carbide or stainless steel materials, with high strength, high hardness, resistance to severe corrosion, severe wear, and other excellent functions; The large and smooth flow channel enables the vortex nozzle to distribute evenly under a wide range of flow rate and pressure, and the droplet size is medium to large spray, which basically eliminates the blockage phenomenon. The solid cone tangential nozzle is adjacent to the hollow cone tangential nozzle, but the difference is that part of the slurry is diverted into the center of the spray area at the top of the closed end of the vortex chamber, thus ending the effect of the solid cone spray.
The particle specification allowed by the nozzle is about 80 ~ 100 of the nozzle standard, and the uniform diameter of the slurry droplets sprayed by the nozzle is higher than that of the hollow cone of the same standard. The double hollow cone tangential nozzle is to plan two spray holes on a hollow cone tangential cavity, and one nozzle is to spray upward and one nozzle is to spray downward in the desulfurization tower. The allowable particle size of the nozzle is 80 ~ 100 of the diameter of the nozzle. The spray method is hollow cone, the spray area is a ring, and the spray view point is 60-90 degrees. The nozzle can produce evenly distributed, medium to large droplet size spray under a wide range of flow rates and pressures. Nozzle specification 2~6 inches, large flow stainless steel vortex nozzle has a large flow channel, to ensure that no blockage occurs. The whole nozzle is casting type, the product is heat resistant, bending resistance, and the function is very strong.
Vortex nozzle features high surface accuracy. High damage strength. Oxidation resistance, long life. Light weight, easy to make a variety of shapes. Not easy to jam, good flow. Silicon carbide double hollow tangential (vortex nozzle) (below 1400℃).
General application of vortex nozzle: water cooling; Desulfurization and denitration; Exhaust gas washing; Fire prevention and resuscitation; Chemical treatment; Gas cooling, etc.
The main characteristics of the vortex nozzle: fog viewpoint of 60 degrees -120 degrees, strong corrosion resistance, strong chlorine resistance, high surface accuracy, high strength oxidation resistance, long life and light weight, easy to make various shapes not easy to block, good flexibility, two-way tangential hollow cone (together with upward and downward spray, the upper and lower viewpoint flow can be different) nozzle manufacturers.