Solid wood furniture is to point to the furniture that makes by natural wood, its raw material basically is the plank after course drying or square material, want to pass batching working procedure above all according to processing technology, namely to board square material according to the dimension specification of spare parts, the processing process that saws become a material to cut the wool makings of all sorts of specifications, shape.

This process mainly produces some small wood blocks and sawdust dust, saw road small, dry dust, dust particle size is small, in the air residence time is short; Second wool finishing and molding processing, planing parts, planing, cutting, molding and other processing, make it smooth and clean, this process mainly produces flake shavings and milling wood dust, is a medium-sized wood dust, particle size is large, if the dust or fly into people's eyes, will cause damage, affect the normal operation. Is other parts in the finishing process of surface finishing processing, such as the fine sand in the process of finishing and polishing processing, the process to produce wood powder dust, paint, rubber dust and so on, to have the most severe dust, manual operation without professional dust collection equipment, sanding and polishing processing of dust particle size small, dust suspended in the air, body cause greater harm to the environment and workers.


When the automatic production line of wood processing plant works, the dust problem is more serious, mainly will produce sawdust, grinding dust, chip and other mixed dust. In general production, a ton of wood processing will produce about 10-12 kg of dust particles, with varying concentrations: the closer to the processing source, the dust particle concentration can reach 1.39 grams per cubic meter, and around the processing source, the dust particle concentration can reach 0.13 grams per cubic meter. Spray dust removal system can effectively reduce the dust content in the air.


The standard for most cases is 0.5 to 4 grams per cubic meter. Thus it can be seen that the dust concentration from the wood processing plant has seriously exceeded the standard. In the wood processing plant staff will be because of long-term inhalation of wood dust mixed type dust, resulting in cough, respiratory discomfort, pneumoconiosis health problems.


It can control the spray time, dust and temperature in the workshop to control the spray time and stop time in the workshop, with strong flexibility.

 
Plant nature:

wood processing, in the process of processing a certain amount of dust, and hot summer will lead to workshop temperature.
Factory size: 60 meters long, 24 meters wide, about 7 meters high.
 
Spray layout:

According to the customer's requirements, the large workshop is divided into two workshops altogether, half of which is equipment processing location, so the layout of this location needs to be more intensive, divided into A-B workshop, workshop A is intensive equipment processing location, so position A

A total of 4 spray tubes are arranged, each with a length of 30 meters. Workshop B is the storage workshop, as long as a spray pipe is installed to remove dust for the forklift driveway.
 
Equipment: 1 set of intelligent high-pressure spray equipment, power 2.2KW, 1 set of water filtration, the number of nozzles 100 (anti-drip leakage device), spray pipe length of 200 meters (stainless steel).