Internal mix Air Atomizing Nozzle with Pressure Flat Spray uses an internal mix of air and liquid in a fan-shaped spray design.Flow rate is adjustable via the adjusting valve.The adjusting screw provided with the needle controls the liquid flow.

Spray Characteristics

●Spray pattern: flat fan
●Spray angles: 45°, 60°
●Flow rates: air flow of 0.7 L/min 0 to 1.8 L/min
liquid flow of 0.95 L/min to 1.98 L/min
Fluid Mixing Mode: Internal Mixing 
Air Pressure: 0.7-7 bar 
Set-ups：Pressure set-up , siphon type
Connecting screw size: 1/8", 1/4", 1/2" BSPT or NPT
Ordering Information
D - 1/4 -SS +SUC13A-SS
Material: 303SS, 316SS, Brass, other on your request
 

Design Features

Atomization can be controlled by varying the air pressure without changing liquid flow rates with external mix set-ups.
For flat spray, dimensions “A”, “B” and “C” are the pattern widths
Liquid is supplied to this spray-up under pressure
Air and Liquid are mixed externally to produce a flat atomized spray

Spray flow is adjustable

The nozzle has the function of adjusting the spray flow rate.So how does the air atomizing nozzle adjust the flow size?
1. Different flow rates can be obtained by adjusting the gas-liquid pressure ratio.
2, air atomizing nozzle with adjusting needle valve, manual knob can adjust the needle valve to adjust the size of spray volume and spray shape.

Common Applications

Widely used for Humidifying ,Spraying coating, Lubricating and Sterilization