Fan nozzle for efficient zipper cleaning
Industry: Textile industry
Business Content: Zipper belt manufacturing, production of zipper belt is widely used in clothing, bags and other fields
Dyeing is an important process that affects the appearance of zippers, while cleaning the excess dye is an important process that affects the quality of zippers. When the cleaning intensity is not enough, the residual dye on the surface of zippers will fade when consumers wash clothes and pollute the clothes fabric.Excessive cleaning may affect the appearance and fastness of the zipper.
Therefore, it is very important to choose a nozzle with moderate striking force for the cleaning process after zipper dyeing.The residual dye on the surface of the zipper belt should be cleaned thoroughly, and the fastness of the zipper cloth should not be decreased.
The cleaning method used by customers in the past: spray rod hole flushing
There are problems:
1. The strike force is not enough to achieve the cleaning effect
2. When cleaning the zipper belt, the cleaning coverage is not complete, and the zipper belt is not evenly cleaned.
Through our professional selection is recommended, and many times of field test, finally selected the mattel spray a standard fan nozzle designed and produced a related spray rod, cleaning result can meet the requirements under low pressure, fan nozzle middle strike force at the same time, the characteristics of the side force is small, thoroughly clean the zipper already,
It will not affect the fastness of the zipper belt on both sides too much.
Product features:
Fine processing of the diversion plane provides uniform, high impact spray shape.
Fan nozzle in the cleaning only need a small amount of water, can save a lot of water.
Mountain flow distribution is especially suitable for multi - nozzle spray rod.
This kind of flat fan nozzle just met the demand of Suzhou Lida Xingye Textile Co., LTD.After using the fan nozzle, not only the cleaning effect becomes better, the quality of the product and the qualified rate is improved, the water consumption required for cleaning is reduced by 50 percent, saving the cleaning cost.